Our Newsletter


Sort by:

Threaded Plugs

both-bags.jpgAdditional threaded plugs can be purchased in packs of (10).  Plugs are available made from brass or mild steel.

These plugs are used to fill the spanner wrench holes on top of the SUMMO-II Series air poppets.  After the SUMMO-II Series air poppet is installed, simply thread the plugs into the spanner wrench holes until they bottom out.  Once the plugs have bottomed out, continue turning the hex clockwise and it will twist off, leaving a small area to be benched off flush with the top of the poppet.

To remove the plugs, center punch a hole approximately 1/8" deep in the center of the insert.  Then use an Easy-Out Extractor® type removal device to extract the plug in a counter-clockwise direction.

For complete installation and removal instructions, click here to download the SUMMO-II Series literature.

Other Items in Threaded Plugs